FAQ · Applications & validation

Why is cleaning inconsistent just after changing the liquid?

Gas in newly prepared liquid can affect ultrasonic action; follow the equipment preparation procedure and check the other conditions too.

Three checks

  1. Confirm whether the required degassing step was completed.

  2. Check solution preparation, temperature and liquid level.

  3. Compare cleanliness under the same loading rather than judging the sound alone.

Where this answer stops applying

Degassing does not explain every cleaning failure or establish chemical compatibility.

How to verify

Complete the preparation sequence in the equipment manual, then repeat a representative sample test and record the bath and machine conditions.

Related questions

Basis & references

Elma: Ultrasonic Cleaning

External references explain general principles; they do not certify Sunnytec model values.

Updated: 2026-11-21 · Sunnytec website editorial content; model-specific values require approved documentation.

Product center · Related application · All 60 questions · Ask a question / report a correction