FAQ · Materials, installation & drive

How tightly should the mounting bolt be tightened?

Use the torque specified for that assembly and process. Neither the model name nor hand feel defines the setting.

Three checks

  1. Distinguish an external mounting fastener from an internal preload bolt.

  2. Check the thread, contact surfaces and specified assembly condition.

  3. Use suitable verified tooling and retain an assembly record.

Where this answer stops applying

Matching bolt sizes do not prove that two assemblies permit the same torque.

How to verify

Request the interface-specific assembly instruction from engineering. Do not adjust internal preload to experiment with performance when the approved procedure is unavailable.

Related questions

Basis & references

Editorial procurement checklist; confirm order-specific requirements with engineering.

Updated: 2026-11-21 · Sunnytec website editorial content; model-specific values require approved documentation.

Product center · Related application · All 60 questions · Ask a question / report a correction