FAQ · Troubleshooting & inspection

Why do parts from one batch give different measurements?

Judge the results against agreed tolerances under consistent test conditions, not an expectation of identical readings.

Three checks

  1. Standardize instrument settings, fixtures, temperature and mechanical state.

  2. Confirm the same material, geometry and product revision before combining results.

  3. Record measurements against the limits and sampling method in the accepted specification.

Where this answer stops applying

Results from different instruments, fixtures or test frequencies may not be directly comparable.

How to verify

First remeasure a reference part to check the measurement setup. Then review the batch distribution with engineering rather than rejecting or accepting the entire batch from a single reading.

Related questions

Basis & references

Editorial procurement checklist; confirm order-specific requirements with engineering.

Updated: 2026-11-21 · Sunnytec website editorial content; model-specific values require approved documentation.

Product center · Related application · All 60 questions · Ask a question / report a correction